Skip to main content

Standardization Makes the Difference

Our 96 MW PowerFLX solution—standardized with a compact, repeatable, scalable 2x LM6000PC power-block—eliminates variability to dramatically decrease costs. Each is visually indiscernible from the next, regardless of location.

30%
Less Cost Than Typical EPC
35%
H2 Ready
47.4 MW/ACRE
Average Footprint With BOP
Delivering on Demands
Engineered to drive power resilience while accelerating renewable growth, our standard PowerFLX solution incorporates 2x LM6000PC gas turbines. Built-in features include selective catalytic reduction (SCR) and carbon monoxide reduction (COR) systems that cut NOx and CO emissions by 90 and 95 percent, respectively. Further, PowerFLX currently enables hydrogen fuel blends of up to 35 percent by volume.
LM6000 Specifications
Model Net Output
(kw)*
Net Heat Rate
(Btu/kWh, LHV)*
PC 97,684 8,760
PD 90,882 8,425
 
Top of Stack Emissions
NOx CO Ammonia Slip
2.5 2.5 10
2.5 2.5 10

*Net values measured on the high-side of the GSU with standard auxiliary and BOP losses. Based on a 60-Hz natural gas application at ISO conditions (59°F, 60% RH, 0 ft ASL). Actual performance will vary with project-specific conditions and fuel.

Measuring Up to Standards
Our PowerFLX solution fits a true turnkey plant in a small energy-packed footprint. Our standard configuration includes everything from the package to the turbine and the high-voltage systems. Whether two units or 12 units with complete BOP, it offers an all-time average energy density of 47.4 MW/acre, which surpasses renewables including solar at 0.5 MW/acre and wind at 0.03 MW/acre.

PowerFLX Standard Scope

  • Gas Turbine
  • Generator
  • Performance Augmentation (Water-Spray Injection and Fogging)
  • SCR/CO
  • Power Distribution Center (PDC)
  • Generator Step-Up Transformer (GSU)
  • Water Storage
  • Water Treatment
  • Air Compressor
  • Auxiliary Transformers
  • LV Switchgear
  • Anti-Icing System
  • Performance Guarantees and Warranty

PowerFLX Dimensions

Powerflx Dimensions

Resilient Operation in All Weather

PowerFLX is built for performance in both hot and cold environments. Our standard features — including the SCR system, fogging skid, and anti-icing solution—ensure consistent, optimal turbine performance in any season and within stringent emissions requirements.

Ø LOSSES
in Gas-Turbine Power Output

Unimpaired Access and Care

PowerFLX is engineered to make maintenance easier, faster, and safer. Designed with user needs at the forefront, your package has features—including a consolidated auxiliary skid, hinged variable bypass valve (VBV) access doors, wider turbine access doors, and added generator access space—that reduce installation and service outage time.

50% Faster
Installation Through Standardization
Made On-Campus
in Missouri
We manufacture PowerFLX packages by transforming raw steel to installation-ready equipment. Completed entirely on campus, our process enlists skilled experts who fabricate, paint, and assemble 24 packages or more per year.